Modulator Settings; Setting Output Level Of The Channel Strips - Triax CCS 483 Assembly Instruction Manual

• Press the
—> The sub-menu "Modulator settings" –
"OUTPUT:

Modulator settings

• By pressing the
(HF output) "on" (default setting) or if necessary switch it
"off".
• Press the
—> The menu "Setting output level of the channel strips" –
"OUTPUT: LEVEL HF OUT:" is activated.

Setting output level of the channel strips

• Press the
—> "OUTPUT: LEVEL CONTROL" appears in the display.
Note:
In this mode a digital carrier is set to the analogue picture
carrier frequency of the output channel of the respective
channel strip. Thus you can measure the absolute output
level using a analogue test receiver.
- 18 - - 18 -
button.
Modulator" is activated.
Bx 1A OUTPUT:
on
Modulator:
buttons, switch the modulator
button.
OUTPUT:
Bx 1A
LEVEL HF OUT:
OUTPUT:
Bx 1A
LEVEL CONTROL
button.
on / off
0
0 ... -7