Advertisement
Updating Your System's Firmware
5
Next, you will be prompted to
login to the DVR. DO NOT enter
a password. Instead, select Login
and bypass the password request
at this time.
NOTE:
Once the firmware has
updated, you will begin the
Startup Wizard and will create
a password at that time.
6
The firmware will now be
downloaded and you will see
a message on screen showing
the firmware is being remotely
updated.
NOTE:
DO NOT power off the
DVR during this process.
7
This process may take up to
5-8 minutes. It is crucial that
you DO NOT power off the DVR
during this process as that will
cause damage to your unit.
5
Advertisement
