Advertisement
2
Next, connect the DVR to your
TV/monitor using the provided
HDMI cable. If your TV/monitor
does not have an HDMI port,
you may use a VGA cable
(not provided).
NOTE:
To view cameras, TV/
Monitor must be tuned to
the same Input the HDMI is
plugged into.
3
Using the provided DVR power
adapter, power on the DVR.
NOTE:
Power adapters will be
labeled as either DVR or
Camera.
4
Once the DVR has powered on,
a Notice message will appear
indicating a new firmware version
is available. Select OK.
NOTE:
Failing to select OK
will result in the firmware not
being updated.
HDMI
4
Advertisement
