Features - Husqvarna DS 700 Operator's Manual

WARNING!
Before operating machine, read and
understand this entire operation manual
& operation manual supplied with the
power source.
Be familiar with machine before opera-
tion!
MANDATORY
WARNING
These signs will give
advice for your safety
Before leaving our factory every machine is
thoroughly tested.
Follow our instructions strictly and your machine
will give you long service in normal operating con-
ditions.
Any persons not involved in the work should
leave the area.
WARNING! Refer to motor manual to
determine appropriate speed to run se-
lected bit.
The working area must be completely
clear, well lit and all safety hazards re-
moved.

FEATURES

INDICATION
INFORMATION
INSTRUCTION
PROHIBITION
Operator must wear per-
sonal protective equipment
& clothing appropriate
to the work he is doing.
Personal protective equip-
ment, such as hearing, eye,
and respiratory protection,
is mandatory.
Use:
This drill stand is designed to be used with
an electric drill motor to bore through steel
embedded concrete, masonry, granite, brick
and similar type products in floors, walls and
ceilings.
Tools:
Diamond Bits — dry or water cooled, diameter:
DS 700:
1 inch (25,4mm) - 10 inch (254mm), maximum
14 inch (356mm) using one 2 inch wide spacer.
DS 800:
1 inch (25,4mm) - 14 inch (356mm), maximum
16 inch (406mm) using one 2 inch wide spacer.
(For information, contact your supplier)
Column Dimensions:
DS 700: 2-1/2 x 2-1/2 inch (63.5 x 63.5mm) Width x Depth
x 42" (1067mm) Height.
DS 800: 2-7/8 x 2-7/8 inch (73 x 73mm) Width x Depth x
42" (1067mm) Height.
Overall Dimensions (Length x Width x Height):
DS 700 / DS 800: 27-1/2" L x 14" W x 44-1/2" H (698 x
356 x 1130mm).
Weight:
DS 700: 105 lbs (48 kg),
DS 800: 110 lbs (50 kg).