Husqvarna DS 700 Operator's Manual page 9

WARNING:
INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY.
DO NOT operate this machine unless you have read and understood this operator's manual.
DO NOT use vacuum system to attach the machine to a wall or ceiling.
DO NOT stand near the bit while the motor is running.
DO NOT leave this machine unattended while the motor is running.
DO NOT work on this machine while the motor is running.
DO NOT operate this machine when you are tired or fatigued.
DO NOT use a wet bit without adequate water supply to the bit.
DO NOT exceed maximum bit speed shown for each bit size. Excessive speed could result in bit breakage.
DO NOT operate the machine if you are uncertain of how to run the machine.
DO NOT use damaged equipment or bits.
DO NOT touch or try to stop a moving bit with your hand.
DO NOT cock, jam, wedge or twist the bit into a cut.
DO NOT transport a drilling machine with the bit mounted on the machine.
DO NOT use a bit that has been dropped or damaged.
DO NOT use carbide tipped or toothed type bits or any kind.
DO NOT touch a dry cutting diamond bit immediately after use. These bits require several minutes to cool after each
cut.
DO NOT allow other persons to be near the machine when starting or when the machine is in operation.
DO NOT operate this machine in an enclosed area unless it is properly vented.
DO NOT operate this machine in the vicinity of anything that is flammable. Sparks could cause a fire or an explo-
sion.
DO NOT operate this machine while under the influence of drugs or alcohol.
DO NOT operate this machine unless you are specifically trained to do so.
DO NOT use a bit that has been over heated.
DO NOT grind on the side of the bit.
DO NOT lay electrical power cords in or near the water.
DO NOT stand on machine base during operation. Operate ONLY when machine is properly secured.
This machine was designed for certain applications only. DO NOT modify this machine or use for any
application other than for which is it was designed. If you have any questions relative to its application, DO NOT
use the machine until you have written Husqvarna Construction Products, Inc. and we have advised you.
SAFETY INSTRUCTIONS
SAFETY FIRST!
WARNINGS
DO's AND DO NOT's
FAILURE TO COMPLY WITH THESE WARNINGS AND OPERATING
*****************
DO NOT
Husqvarna Construction Products, Inc.
17400 W. 119th Street
Olathe, KS 66061