Threading The Needle Thread; Threading The Overlock Needle Thread Ln/Yellow - Bernina L 890 User Manual

8.3 Threading the needle thread

For the needles color-coded threading paths are assigned.

Threading the overlock needle thread LN/yellow

The thread path for the left overlock needle is marked in yellow.
For a combostitch with the left overlock needle LN, the green thread path is to be used.
Prerequisite:
• «Preparing for threading» has been performed. (see page 88)
• The presser foot is swung out. (see page 43)
> Pull the thread beneath the thread guide plate to the left and through the yellow marking of the thread
deflection finger.
> Place the thread over the yellow thread take-up lever cover of the overlock needle and pull it down.
> Pull the thread in the 2nd position from the right through the thread guide.
> Hook the thread into the thread guide on the needle holder, corresponding to the needle used.
> Thread the left overlock needle (LN).
> Place the needle thread under the presser foot to the rear left.
Threading
95