Bernina L 890 User Manual page 8

Important safety instructions
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8
Do not use this machine if the cable or plug is damaged, the machine is not
functioning correctly, it is dropped or becomes damaged or falls in water.
Never operate this machine if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or dropped into
water. Contact the nearest authorized BERNINA dealer to arrange further
details.
Only use accessories recommended by the manufacturer.
Do not use this machine if the ventilation openings are blocked. Keep all
ventilation openings and foot control free of lint, dust and loose cloth.
Do not insert any objects into the openings of the machine.
Do not place any objects on the foot control.
Always use the machine with a foot control of this type LV-1.
Do not use the machine anywhere that oxygen or propellant products
(sprays) are being used.
The knife cover insert or coverstitch insert must be attached continuously
while operating the machine.
Keep fingers away from all rotating and moving parts. Special care is
required in the needle area, the looper and the knife.
Neither pull nor push the fabric while sewing. This can cause needle
breakage.
Turn power switch to «0» when making any adjustments in the needle area,
such as threading the needle or changing the needle or the presser foot.
Never use damaged needles.
Always use the original BERNINA stitch plate. The wrong stitch plate can
cause needle breakage.
To disconnect, turn power switch to "0"and then remove the plug from the
outlet. Always pull on the plug and not the cable.
Disconnect the plug before removing or opening the covers, oiling the
machine or performing any cleaning or maintenance work described in this
instruction manual.
This machine is double-insulated (except for USA, Canada and Japan). Use
only genuine replacement parts. See instructions for Servicing of double-
insulated products.