Thread Stand; Preparing The Retractable Thread Guide - Bernina L 890 User Manual

Setting up the machine

3.2 Thread stand

Thread cones, foot spools or household spools of all sizes can be placed on the thread stand.

Preparing the retractable thread guide

The retractable thread guide is placed on the thread stand. It ensures a clean unwinding of the thread from
the thread cones. Each thread is guided through a thread guide wire located directly above the thread cone.
These thread guide wires are color-coded according to the threading path.
> Hold the thread guide attachment and pull it fully up.
> Turn the thread guide to the left and right until the two positioning pins engage.
– The outer thread guide wires are parallel to the machine front.
> To retract the thread guide, push the thread guide down with a little pressure.
38