Conference Controller Privileges - Comdial DX-80 User Manual

1. Answer or place the first call (internal or external).
2. Press Hold.
3. Place the second call (internal or external).
4. Press the feature button programmed as Conference. The sys-
tem joins the connections together.
5. Hang up to end the conference.
To establish a four-party conference, perform the following steps.
1. First establish a three party conference.
2. Press Hold.
3. Place the third call (internal or external).
4. Press the feature button programmed as Conference. The sys-
tem joins the connections together. You are the controller of
the conference and count as one of the four parties.
5. Hang up to end the conference.
To establish an unsupervised conference, first establish a conference
with two or three outside lines. Then press Func + 7 + 7. The system
establishes the unsupervised conference and returns your extension to
idle.
To rejoin an unsupervised conference, press Func + 7 + 7. The
system rejoins your extension to the unsupervised conference.

3.8.1 CONFERENCE CONTROLLER PRIVILEGES

As a conference controller, you can force the release of a conference
member or establish a private connection with a conference member.
To force the release of a conference member, perform the following
steps.
1. While engaged in a conference the display appears as follows.
May '05 Comdial
DX-80 Cordless User
75