Using Speed Dial Numbers; Automatic Redialing - Comdial DX-80 User Manual

3.5 Using Speed Dial Numbers

This feature provides one- or two-button speed dialing using pro-
grammable buttons at which you have previously stored numbers.
When using speed dialing, you have the choice to either select a spe-
cific outside line you want to use, or to let the system automatically
select the outside line.
To select the outside line yourself, perform the following steps.
1. Press the outside line number you want to use or dial the out-
side line directory number (740-755).
2. Press Func + 1.
3. Dial the location of the speed dial that you want to use (470-
489, or 500-699).
To let the system select the outside line, simply dial the location of the
speed dial that you want to use (500-699). The system uses the last
outside line that you used, or any outside line in the same line group.

3.6 Automatic Redialing

You can use Automatic Redial (AR) to dial the last number you
dialed. The system automatically dials the number and then waits for
a predetermined time for the call to be answered. If the call is not
answered during this time, the system hangs up and then tries the call
again. The number of attempts the phone will make is determined in
the system programming.
To use Automatic Redial, when you place a call and receive a busy
signal, hang up. Then press Func + 7 + 8.
May '05 Comdial
DX-80 Cordless User
73