Assist Button Programming; Transfer Button Programming - Comdial DSU and DSU II System Reference Manual

Programming Your Telephone

10.8 Assist Button Programming

With this feature you can program an "assist" button on your telephone
that will let you send a message to an LCD speakerphone. By pushing
this button you can let a party at another station know, with a tone and a
station message display, that you need assistance with a call.
Then, after receiving the tone and the display message, that person can
join the call or monitor it through executive override or service
observing.
To program an assist button,
1. Press INTERCOM
2. Press programmable button you want as assist button.
3. Dial 7.
4. Dial to choose system-provided message. (System message =
"ASSIST" plus name or extension number of station sending
message. Name or extension is automatically added by system.)
—OR—
Dial 0 - 9 to choose preprogrammed message (see attendant for
list of messages).
5. If one particular station must always receive message, dial
extension number of that station; otherwise, press SPEAKER to
end.

10.9 Transfer Button Programming

This program lets you set up a button to be used for transferring calls to
voice mail.
To assign a "transfer to voice mail" button:
1. Press INTERCOM
2. Press the programmable button you want to use.
3. Dial 6.
4. Dial extension number.
5. Press SPEAKER to end.
10–10 LCD Speakerphone Reference Manual
1.
1.
GCA70–245