ATF Instruction Manual
4.3 Joint tape
Part number
E9031706AA0
Note: The width of the cover tape should be 4.9 ± 0.1 mm according to the JIS
(C0806-3:1999). If your cover tape exceeds this value, you have to use a
joint tape appropriate for the cover tape.
4.4 Tape reel attaching platform
This device allows you to fix the tape feeder in the same manner as you attach it on
the feeder bank, and set a tape reel on the tape feeder when you have to replace it
with a new one.
Since this option allows you to set a tape while supporting the tape feeder properly, it
improves the tape setting correctness, minimizes the working space and prevents the
tape feeder from dropping off.
① Tape reel attaching platform (no foot)
Fix the tape reel attaching platform on a table with screws.
② Tape reel attaching platform (with foot)
Width
5mm
30