First Firing - Vermont Castings RHEDV25 Installation Instructions & Homeowner's Manual

3/8" - 1/2"
SIT Pilot
Fig. 24 Correct pilot flame appearance.
RHEDV25/32
Fig. 25 Correct burner flame appearance for RHEDV25 and
RHEDV32 models.
RHEDV42
Fig. 26 Correct burner flame appearance for RHEDV42.
10000801
Vermont Castings, Majestic Products RHEDV Direct Vent Insert
PSE Pilot
F584-703
LG283
LG283

First Firing

Upon completing the gas line connection, a small
amount of air will be in the lines. When first lighting unit
with pilot light, it will take a few minutes to purge them-
selves of this air. Once the purging is complete, the
pilot and burner will light and operate as indicated in the
instruction manual. Subsequent lightings of the heater
will not require such purging.
When lit for the first time, the appliance will emit a slight
odor for awhile. This is due to paint and lubricants used
in the manufacturing process. After each lighting, vapor
may condense and fog the glass; this moisture disap-
pears within a few minutes of burning.
13