Vermont Castings RHE32 Installation Instructions & Homeowner's Manual page 31

B4 HEBTKP, HESBTKP, HECBTK, HECBTKMB & HEBTA Trims
For use with RHEDV32
HECBTK
HECBKMB
HESBTKP
HEBTKP
Install the bay window after all other installation work has been completed, thoroughly checked and tested for opera-
tion, leaks and proper installation requirements.
Do not remove existing glass with frame
HEBTKP
Fig. 48 Optional bay front windows available for use on the RHEDV32.
HECBTKP, HECBTKMB and HESBTKP
Trim Assembly
1. Reposition controls.
a. Remove the Fan Speed Control Box (Fig. 49)
b. Attach the Fan Speed Control Box to the Bracket
(Fig. 50) and install the Bracket into the Cabinet.
Only for RN/RP VALVE units:
c. Install the Control Knob Extensions onto the
appropriate Control Valve Knobs (Fig. 51)
On units fitted with a Honeywell brand control
valve the location of the control knobs and the
ignitor button may vary slightly from those
shown in Figure 51. The Honeywell exten-
sion pieces are visually different in design
and are not interchangeable with the RN/RP
knobs shown in Figure 51.
10000836
Vermont Castings, Majestic Products RHE Natural Vent Insert
Cast bay window and grilles in classic black trim kit
Cast bay window and grilles in midnight black porcelain enamel trim kit
Steel bay window with polished brass and cast grilles in classic black trim kit
Steel bay window and bay louvres with polished brass trim kit
HESBTKP
2. Install the hanging brackets. (Fig. 52)
3. Install the two (2) ceramic pieces inside the bay
window. (Fig. 48)
4. Install the bay window by hanging it onto the lower
tabs of the hanging brackets. (Fig. 53)
5. Install the upper grille by engaging the oblong holes
with the upper tabs of the hanging brackets. (Fig.
54)
6. Install brass trim to the steel frame. (Fig. 55) (Only
for HESBTKP trim).
HEBTKP Trim Assembly
1. Reposition controls.
a. Remove the Fan Speed Control Box (Fig. 49)
b. Attach the Fan Speed Control Box to the Bracket
(Fig. 50) and install the Bracket into the Cabinet.
Only for RN/RP VALVE units:
c. Install the Control Knob Extensions onto the
appropriate Control Valve Knobs. (Fig. 51)
HECBTK &
HECBTKMB
31