Table of Contents
Advertisement
Electronic climate control
1. Unscrew the shift knob counter
clockwise to remove. (Figure A)
2. Unclip and remove the cup holder/
parking brake cover and shifter
cover as one radio. (Figure B)
3. Remove (2) Phillips screws from
the bottom of the radio/climate
control panel. (Figure C)
4. Open glove box, squeeze sides
together and let open fully then
remove (1) 10mm bolt from the
side of the radio bracket.
(Figure D)
(Figure A)
Dash Disassembly
(Figure B)
(Figure C)
INSIDE
GLOVE BOX
(Figure D)
99-7524B
5. Unsnap and remove radio/climate
control panel including climate
control vents at the top. (Figure E)
6. Remove (4) Phillips screws
securing vents to radio/climate
control panel to remove. (Figure F)
7. Remove (8) Phillips screws
securing the electronic climate
control to the radio/climate control
panel to remove. (Figure G)
Continue to kit preparation
(Figure E)
2
(Figure F)
Rear of Radio/Climate Control Panel
Rear of Electronic Climate Control
(Figure G)
Advertisement
Table of Contents
