Agilent Technologies 1200 Series Reference Manual page 117

15 Reconnect all capillaries, tubes and the active inlet valve cable to its
16 Route the wash inlet tube into a bottle filled with a mixture of distilled
17 Route the outlet of the wash tube into a waste container.
Figure 22
1200 Series QP Reference Manual
screws and the balls of the spindle drive. Tighten the pumphead screws
stepwise with increasing torque
connector
water and isopropanol (90/10) and place the bottle above the pump in the
solvent cabinet.
Pumphead after completed installation.
Repairing the Pump
117
4