Avaya 1000 Manual page 93


in the IP Telephony application

in the selected codec in Element Manager
The jitter buffer is statically configured and is the same for all devices in the network. The jitter buffer size range is 0-200 ms. The default jitter
buffer value is 50 ms. However, the jitter buffer setting that is used on the
Voice Gateway Media Card is a multiple of the codec frame size. The setting is automatically adjusted to be greater than or equal to the jitter
buffer value set in the DSP Profile tab. As each call is set up, the jitter buffer for each device is set to the nearest whole number increment of
the selected codec frame size.
See reference 4 (Communication Server 1000 Converging the Data Network with VoIP Fundamentals) for details.
Note 7: General recommendation for network security scans as follows:

ELAN is considered an isolated LAN. It should be excluded from scanning. If the ELAN/TLAN is routed for some reason, customer can
isolate the specific ports that have been routed.

TLAN is connected to customer LAN – so not an issue to scan TLAN.

Security scan should be carried out during a maintenance window / after-hours.
Avaya Communication Server 1000 Port Utilization – Issue 4.04
Avaya – Proprietary.
Use pursuant to the terms of your signed agreement or Avaya policy.
93