ZyXEL Communications LTE Series User Manual page 42

Figure 28 Network Setting > Broadband > Cellular IP Passthrough > Enable Warning
The following table describes the fields in this screen.
Table 13 Network Setting > Broadband > IP Passthrough
LABEL DESCRIPTION
IP Passthrough Management
IP Passthrough IP Passthrough allows a LAN computer on the local network of the Zyxel Device to have access to
web services using the public IP address. When IP Passthrough is configured, all traffic is forwarded
to the LAN computer and will not go through NAT.
Passthrough Select Dynamic to allow traffic to be forwarded to any LAN computer on the local network of the
Mode Zyxel Device. Select Fixed to allow traffic to be forwarded to a specific LAN computer on the local
network of the Zyxel Device.
Note: This field will show upon enabling IP Passthrough in the previous field.
Passthrough Enter the MAC address of a LAN computer on the local network of the Zyxel Device upon
to fixed MAC selecting Fixed in the previous field.
Note: This field will show upon selecting Fixed in the previous field.
Cancel Click this to exit this screen without saving any changes.
Apply Click this to save your changes.
Chapter 5 Broadband
LTE Series User's Guide
42