ZyXEL Communications LTE Series User Manual page 141

Table 65 Maintenance > Log Setting (continued)
LABEL DESCRIPTION
Syslog Server Enter the server name or IP address of the syslog server that will log the selected categories of
logs.
UDP Port Enter the port number used by the syslog server.
E-mail Log Settings
E-mail Log Click the switch (it will turn blue) to allow the sending via e-mail the system and security logs to
Setting the e-mail address specified in Send Log to.
Note: Make sure that the Mail Server Address field is not left blank in the
Mail Account Select a server specified in Maintenance > Email Notifications to send the logs to.
System Log Mail This field allows you to enter a descriptive name for the system log e-mail (for example Zyxel
Subject System Log). Up to 127 characters are allowed for the System Log Mail Subject including special
characters inside the square brackets [!#%()*+,-./:=?@[]\{}~].
Security Log Mail This field allows you to enter a descriptive name for the security log e-mail (for example Zyxel
Subject Security Log). Up to 127 characters are allowed for the Security Log Mail Subject including
special characters inside the square brackets [!#%()*+,-./:=?@[]\{}~].
Send Log to This field allows you to enter the log's designated e-mail recipient. The log's format is plain text
file sent as an e-mail attachment.
Send Alarm to This field allows you to enter the alarm's designated e-mail recipient. The alarm's format is plain
text file sent as an e-mail attachment.
Alarm Interval Select the frequency of showing of the alarm.
Active Log
System Log Select the categories of System Logs that you want to record.
Security Log Select the categories of Security Logs that you want to record.
Cancel Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes.
Chapter 23 Log Setting
Maintenance > E-mail Notifications screen.
LTE Series User's Guide
141