ZyXEL Communications LTE Series User Manual page 36

Figure 21 Network Setting > Broadband > Cellular WAN
The following table describes the fields in this screen.
Table 8 Network Setting > Broadband > Cellular WAN
LABEL DESCRIPTION
Roaming
Data Roaming Click this to enable (
4G roaming is to use your mobile device in an area which is not covered by your service provider.
Enable roaming to ensure that your Zyxel Device is kept connected to the Internet when you are
traveling outside the geographical coverage area of the network to which you are registered.
APN Settings
APN Manual Disable this to have the Zyxel Device configure the APN (Access Point Name) of an LTE network
Mode automatically. Otherwise, Click this to enable (
below.
APN This field allows you to display the Access Point Name (APN) in the profile.
Enter the Access Point Name (APN) provided by your service provider. Connections with different
APNs may provide different services (such as Internet access or MMS (Multi-Media Messaging
Service)) and charging method.
You can enter up to 30 printable ASCII characters. Spaces are allowed.
Username This field allows you to display the user name in the profile.
Type the user name (up to 31 printable ASCII characters) given to you by your service provider.
Password This field allows you to set the password in the profile.
Type the password (up to 31 printable ASCII characters) associated with the user name above.
Chapter 5 Broadband
) data roaming on the Zyxel Device.
LTE Series User's Guide
36
) and enter the APN manually in the field