Using An Snmp Manager - NETGEAR ProSafe FVS336G Reference Manual

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
To access the CLI from a communications terminal when the VPN firewall is still set to its factory
defaults (or use your own settings if you have changed them), do the following:
1. From your computer's command line prompt, enter the following command:
telnet 192.168.1.1
2. Enter admin and password when prompted for the login and password information (or enter
guest and password to log in as a read-only guest).
3. Enter exit to end the CLI session.
Any configuration changes made via the CLI are not preserved after a reboot or power cycle unless
the user issues the CLI save command after making the changes.

Using an SNMP Manager

Simple Network Management Protocol (SNMP) lets you monitor and manage your VPN firewall
from an SNMP Manager. It provides a remote means to monitor and control network devices, and
to manage configurations, statistics collection, performance, and security.
The SNMP Configuration table lists the SNMP configurations by:
• IP Address. The IP address of the SNMP manager.
• Port. The trap port of the configuration.
• Community. The trap community string of the configuration.
To create a new SNMP configuration entry:
1. Select Administration > SNMP from the main menu. The SNMP screen is displayed.
Router and Network Management
v1.2, June 2008
8-13