Configuring Session Limits - NETGEAR ProSafe FVS336G Reference Manual

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
d. From the Direction pull-down box, select whether the profile will apply to outbound or
inbound traffic.
4. Click Apply. The new bandwidth profile will be added to the list.

Configuring Session Limits

To prevent one user or group from using excessive system resources, you can limit the total
number of IP sessions allowed through the FVS336G for an individual or group. You can specify
the maximum number of sessions by either a percentage of maximum sessions or an absolute
number of maximum sessions. Session limiting is disabled by default.
To configure session limits:
1. Select Security from the main menu.
2. Select Address Filter from the submenu. The Source MAC Filter screen will display.
3. Select the Session Limits tab. The Session Limits menu will display.
Figure 4-17
4. Click Yes to enable Session Limits.
4-32 Firewall Protection and Content Filtering
v1.2, June 2008