Configuring The Client Ip Address Range - NETGEAR ProSafe FVS336G Reference Manual

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual

Configuring the Client IP Address Range

Determine the address range to be assigned to VPN tunnel clients, then define the address range.
To configure the client IP address range:
1. Select VPN > SSL VPN from the main menu, and then select the SSL VPN Client tab. The
SSL VPN Client screen will display..
Figure 6-5
2. Select Enable Full Tunnel Support unless you want split tunneling.
3. (Optional) Enter a DNS Suffix to be appended to incomplete DNS search strings.
4. Enter Primary and Secondary DNS Server IP addresses to be assigned to the VPN tunnel
clients.
5. In the Client Address Range Begin field, enter the first IP address of the IP address range.
6. In the Client Address Range End field, enter the last IP address of the IP address range.
7. Click Apply.
The "Operation Successful" message appears at the top of the tab.
Virtual Private Networking Using SSL Connections
v1.2, June 2008
6-11