ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
temporary IPsec policy using the template security proposal information configured in the Mode
Config record.
Note: After configuring a Mode Config record, you must go to the IKE Policies menu
and configure an IKE policy using the newly-created Mode Config record as the
Remote Host Configuration Record. The VPN Policies menu does not need to be
edited.
Configuring the VPN Firewall
Two menus must be configured—the Mode Config menu and the IKE Policies menu.
To configure the Mode Config menu:
1. Click VPN in the main menu.
2. Click IPsec VPN in the submenu.
3. Click the Mode Config tab. The Mode Config tab is displayed..
Figure 5-14
4. Click Add. The Add Mode Config Record screen is displayed
5-24
Virtual Private Networking Using IPsec
v1.2, June 2008