Buttons - Bosch WAN280H1 Installation And Operating Instructions Manual

Table of Contents

Advertisement

0

Buttons

Programme setting
Once you have set a programme, you are shown preset programme settings. These are recommendations
for the set programme and vary. You can adjust the programme settings to optimise the washing process
for your laundry.
An overview of the possible programme settings can be found on ~ Page 26
You can find out how to adjust programme settings on ~ Page 31
U/min (rpm)
Fertig in (Ready in)
Speed / Eco Perfect
Appliance setting
You can find out how to adjust the appliance setting on page~ Page 35
Start/Nachlegen
(Start/Pause)
E 3 Sek.
(Childproof lock)
--------
Function
Adjust the spin speed in rpm (revolutions per minute).
The adjustable spin speed depends on the programme.
Note:
Setting 0:
The laundry stays wet inside the drum and will not be spun at the end of the
washing cycle. The water is only drained
Rinse Stop ~ ~~:
The laundry remains in the water after the last rinse cycle. No spin and no
draining at the end of the washing cycle.
For reducing creasing when the laundry is not taken out of the washing
machine immediately after the programme ends.
To continue the programme with Rinse Hold~ Page 34
Before starting the programme, you can delay the time at which the pro-
gramme ends by up to 24 hours.
The set time in hours, e.g. 8 h, is shown in the display and counts down until
the programme starts. Once the programme has started, the programme
duration is displayed.
Note:
The programme duration is included in the "Ready in" time.
Eco Perfect: Energy-saving washing via reduced temperature while achiev-
ing a washing result that is consistent with the selected programme without
the Eco Perfect setting.
Speed: Washing in a shorter time while achieving a washing result that is
consistent with the selected washing programme without the Speed setting.
Note:
The energy consumption is higher than with programmes without the
Speed setting.
Function
Starting, cancelling and interrupting a programme.
You can lock the washing machine to prevent the functions you have set from
being changed inadvertently.
Programme overview
en
27

Advertisement

Table of Contents
loading

Table of Contents