Installing and connecting the appliance
en
Remove the mains cable from the
3.
holders.
Remove the sleeves.
4.
Insert cover caps and lock firmly by
5.
pressing on the locking hook.
14
Connecting the appliance
Caution!
Material damage/damage to the
appliance
If the water pressure is too high or
■
too low, the appliance may not be
able to operate properly, and it may
also result in material damage or
damage to the appliance.
Make sure that the water pressure in
the water supply facility is at least
100 kPa (1 bar), and does not
exceed 1000 kPa (10 bar).
If the water hoses are altered or
Materi a l damage/damage to the appl i a nce
■
damaged, this may result in material
damage or damage to the
appliance.
The water hoses must not be kinked,
crushed, altered or severed.
The use of hoses supplied by other
Materi a l damage/damage to the appl i a nce
■
brands to connect to the water
supply may result in material
damage or damage to the
appliance.
Use the hoses supplied with the
appliance or genuine spare part
hoses only.
Notes
In addition to the information listed
■
here, the local water and electricity
supplier may have special
requirements.
If in doubt, have your appliance
■
connected by a professional.