Table of Contents
Advertisement
Installing the appliance on a base:
Caution!
Damage to the appliance
The appliance may "wander" and tip/
topple from the base when spinning.
Always secure the appliance feet with
fixing brackets.~ Page 19
Installing the appliance on a wooden
beam surface:
If possible, install the appliance in a
■
corner
Place the appliance on a water-
■
resistant wooden board (min. 30 mm
thick) which is screwed tightly to the
floor.
Installing the appliance in a kitchen
unit:
A niche width of 60 cm is required.
Only install the appliance underneath a
continuous worktop that is securely
connected to adjacent cabinets.
:
Warning
Danger of death!
There is a risk of electric shock if live
parts are touched.
Do not remove the appliance covering
plate.
Installing and connecting the appliance
Transit bolts
Caution!
Material damage/damage to the
appliance
The appliance is secured for
transportation by transport locking
devices. If the transport locking devices
are not removed before the appliance is
operated, this may result in damage to
the appliance.
It is important to completely remove all
transport locking devices before using
the appliance for the first time. Make
sure that you retain these transport
locking devices separately. It is
important to refit the transport locking
devices if the appliance is to be
transported, in order to prevent the
appliance from being damaged in
transit.
Remove the transit bolts as follows:
Remove the hoses from the holders.
1.
Unscrew and remove all four screws
2.
for the transit bolts with a wrench
(WAF 13).
en
13
Advertisement
Table of Contents
