Avaya 9600 Series Application Notes page 4

Avaya
Avaya
Avaya
Computer Instruments
5. Configure Avaya 9600 IP Phones
This section describes the IP Phone configuration to support the network shown in Figure 1.
The configuration of the IP Phone can be done manually or through DHCP. The compliance
testing used DHCP to assign the IP Phone with the IP address of the IP Phone Pager application.
During the installation of the IP Pager application the IP Phone's home page is set by modifying
the "WMLHOME" parameter in the 46xxsettings.txt file. Additionally the "SUBSCRIBELIST"
and "TPSLIST" parameter are set so the phone can register with the IP Pager application.
Please refer to http://instruments.com/support/index.html
Parameters added to 46xxsettings.txt file for compliance testing.
SET WMLHOME http://10.64.51.197/webpager/ippager.aspx?wci=page
SET SUBSCRIBELIST http://10.64.51.197/webpager/ippager.aspx?wci=page
SET TPSLIST 10.64.51.197
6. Configure e-IVR IP Phone Pager

Login to IP Phone Pager

Verify Phone Registration with IP Phone Pager application.

Create Groups
6.1. Login to IP Phone Pager
From a Windows Internet Explorer Web Browser enter the URL of the IP Phone Pager
Application.
http://<location of IP phone Pager Application>/webpager/
In the compliance testing the application was running at
Log in using the appropriate credentials.
RDC; Reviewed:
SPOC 2/1/2012
9600 Series IP Deskphone
Avaya Aura
Communication Manager
IP Office 500V2
e-IVR IP Phone Pager
Solution & Interoperability Test Lab Application Notes
©2012 Avaya Inc. All Rights Reserved.
Avaya One-X
Deskphone
Edition S3.103s
®
6.0
8.0
2.0
for more detailed information.
http://10.64.51.197/webpager/
GA November 2011
GA October 2011
GA December 2011
GA March 2011
4 of 14
CII_IP_Pager