Learning Method - Universal Remote Control omega MX-650 Owner's Manual

U n i v e r s a l R e m o t e C o n t r o l , I n c .
Repeat steps one through nine for each of your devices. Test all the
10
commands you've programmed. If you are missing any commands,
use the learning method, described next:

Learning Method

The Omega can learn commands from your old remote controls one-
button-at-a-time on any button of any device, on the MAIN or FAV LCD
buttons or on the MAIN hard buttons, by following these simple steps:
Line-up the Omega with your old remote control, head-to-head,
1
one or two inches apart.
On the Omega, press and hold the MAIN and ENT (Enter) buttons
2
at the same time for approximately three seconds. The top of the
display will show "SETUP". You are in SETUP mode now.
Note: You have 30 seconds to perform a step while you are in SETUP mode. If
you don't press a button within that time, the Omega will time out and return to
normal operation.
3
Press the LEARN button.
The top of the screen will change to "LEARN".
9
LEARN
Button