Learning Method - Universal Remote Control Osiris MX-3500 Owner's Manual

U n i v e r s a l R e m o t e C o n t r o l , I n c .
Repeat steps one through nine for each of your devices. If you are
10
missing any commands, use the learning method, described next

Learning Method

The Osiris can learn commands from your old remote controls one-but-
ton-at-a-time by following these simple steps:
Line-up the Osiris with your old remote control, head-to-head,
1
one or two inches apart.
On the Osiris, press and hold the MAIN and ENT (Enter) buttons at
2
the same time for approximately three seconds. The top of the dis-
play will show "SETUP". You are in SETUP mode now.
Note: You have 30 seconds to perform a step while you are in SETUP mode. If
you don't press a button within that time, the Osiris will time out and return to
normal operation.
3
Press the LEARN button.
The top of the screen will change to "LEARN".
9
LEARN
Button