Universal Remote Control omega MX-650 Owner's Manual page 10

Note: If a component fails to turn off after you have entered all of the code
numbers listed for your brand, your component might actually be manu-
factured by another brand. You can scan through the other brands in the
table using the UP and DOWN buttons to change the code number dis-
played, then tapping either the Power ON, OFF or any other button to see
if the component responds to any command. Alternatively, you can opt to
use the Learning Method on Page 9 if you can't find a code set in the built-
in database.
Press Power On
or Power Off to
test if the device
powers off.
Scan Down to the
previous
Code Number
When the component turns off, save the code number you entered
8
by pressing the SAVE button that appears on the screen.
Code Number You
Entered
Exit SETUP mode by pressing the MAIN button two times. When
9
the display shows "MAIN", you are back in normal operating
mode.
T h e O m e g a
8
Scan Up to the
next Code
Number
SAVE
Button
MAIN
Button