Checking The Codes; Using Learning; Learning Precautions - Universal Electronics M1055 User Manual

7. To search for the codes of your other devices,
repeat steps 1 through 5, but substitute the
appropriate key (e.g., AUX, DVD, AUD, or CBL)
for the device you are searching for.

CHECKING THE CODES

If you have set up theAtlas Shaw DVR/PVR 5-Device
Universal Remote Control by searching for your device
code (on the previous page), you may need to find out
which four-digit code is operating your equipment.
For example, to find out which code is operating your TV:
On the remote control, press TV once; it will
1.
blink once. Then press and hold SETUP until
the TV key blinks twice.
2. Enter 9 9 0. The TV key will blink twice.
3. To view the code for the first digit, press 1
once. Count the number of times the TV key
blinks (e.g., 3 blinks = 3) and write down the
number in the leftmost TV Code box on
page 10.
NOTE: If a code digit is 0, the selected mode key will
not blink.
4. Repeat step 3 three more times for the
remaining digits. Use 2 for the second digit, 3
for the third digit, and 4 for the fourth digit.
Finish writing down the code in the TV Code
boxes on page 10.
5. To check for other device codes, repeat steps 1
through 4, but substitute the appropriate key
(e.g., AUX, DVD, AUD, or CBL) for the device
you are checking. Write down the codes in the
appropriate boxes on page 10.

USING LEARNING

The Atlas Shaw DVR/PVR 5-Device Universal Remote
Control includes a Learning feature so you can add
functions that are unique to your home entertainment
devices (e.g.,VCR Tracking Up or Down). However, there
are some considerations.

Learning Precautions

• Your original remote controls must be in working
order for learning to work properly.
12