Configuring The Avaya Ix; Configuring Nat And Firewall In Avaya Ix - Avaya IX Collaboration Unit CU360 Installing And Administering

Advance administration

Configuring the Avaya IX

About this task
You can configure the base port to any value between 1024 and 65535.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
IX CU360 displays the Advanced window.
3. Click Networks > Preferences > Dynamic Ports.
4. Configure the following fields:
TCP
Automatic
Ports
If you select No in the Automatic field, you should manually configure the TCP, UDP, or
BFCP UDP base ports in Ports.
5. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings

Configuring NAT and firewall in Avaya IX

About this task
Configure a NAT router and firewall for Avaya IX
This configuration is available only if your administrator enables the advanced settings for users.
Before you begin
Configure the Avaya IX
April 2020
™
CU360 port ranges
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
UDP
Automatic
Ports
™
CU360 port ranges.
Installing and Administering Avaya IX Collaboration Unit CU360
Comments on this document? infodev@avaya.com
BFCP UDP
Automatic
Ports
on page 37
™
CU360
™
CU360.
92