USSC Clayton 1800GC Installation & Operator's Manual page 8

BRICK INSTALLATION BRICK INSTALLATION BRICK INSTALLATION BRICK INSTALLATION BRICK INSTALLATION
(PRE-INSTALLED AT FACTORY) (PRE-INSTALLED AT FACTORY) (PRE-INSTALLED AT FACTORY)
(PRE-INSTALLED AT FACTORY) (PRE-INSTALLED AT FACTORY)
NOTE: Prior to operation, be sure to remove brick
retaining strips.
MODEL 1600 - (6) BRICKS ON EACH SIDE MODEL 1600 - (6) BRICKS ON EACH SIDE
MODEL 1600 - (6) BRICKS ON EACH SIDE MODEL 1600 - (6) BRICKS ON EACH SIDE MODEL 1600 - (6) BRICKS ON EACH SIDE
FIREBOX LEFT SIDE
SLIDE 4th BRICK BACK
BEFORE INSTALLING 5th
AND 6th BRICK
MODEL 1800 - (8) BRICKS ON EACH SIDE MODEL 1800 - (8) BRICKS ON EACH SIDE
MODEL 1800 - (8) BRICKS ON EACH SIDE MODEL 1800 - (8) BRICKS ON EACH SIDE MODEL 1800 - (8) BRICKS ON EACH SIDE
FIREBOX LEFT SIDE
FIREBOX:
The firebrick must be inserted on each side resting on the
grate frame. First, place cut brick in each back corner. Place
remaining brick in place.
BRICK RETAINING STRIP
BRICK RETAINING STRIP
SMOKE CHAMBER:
1. Place #1 firebrick in the back of smoke chamber.
2. Slide baffle plate into smoke chamber, flat side down.
3. Place remaining firebrick in smoke chamber as
numbered below. (in placing the firebrick in the smoke
chamber, lift the left side of firebrick first and drop into
place.) See Illustrations below.
MODEL 1600
(4 1 / ) BRICKS
2
MODEL 1800
(6) FULL BRICKS
8
2 2 2 2 2
1/2 BRICK
3 3 3 3 3
5 5 5 5 5
4 4 4 4 4
6 6 6 6 6
2 2 2 2 2
4 4 4 4 4
5 5 5 5 5
6 6 6 6 6
7 7 7 7 7
TOP
REAR OF
FIREBOX
1 1 1 1 1
1 1 1 1 1
3 3 3 3 3