USSC Clayton 1800GC Installation & Operator's Manual page 10

INSTALLING ASH DOOR SPIN DRAFT INSTALLING ASH DOOR SPIN DRAFT INSTALLING ASH DOOR SPIN DRAFT INSTALLING ASH DOOR SPIN DRAFT INSTALLING ASH DOOR SPIN DRAFT
1. Screw spin draft onto 1/2" x 2-1/2" carriage bolt.
2. Screw spin draft and bolt assembly into ash door allowing
approximately 1/2" of the bolt to extend beyond the inside
of the door.
3. Secure bolt in place with 1/2" locking nut.
1/2" X 2-1/2"
CARRIAGE
BOLT
1/2" LOCK NUT
SPIN DRAFT CAP
10
MOUNTING PROCEDURE FOR MOUNTING PROCEDURE FOR MOUNTING PROCEDURE FOR MOUNTING PROCEDURE FOR MOUNTING PROCEDURE FOR
MOTORIZED NATURAL DRAFT MOTORIZED NATURAL DRAFT MOTORIZED NATURAL DRAFT
MOTORIZED NATURAL DRAFT MOTORIZED NATURAL DRAFT
DRAFT
TUBE
CLAMP
MOTORIZED NATURAL DRAFT
1. Using (2) 1/4" x 1" bolts, lock washers and nuts,
attach draft to furnace with draft tube clamp.
2. Plug draft power cord into receptacle on front of
furnace.