Monitors; Symbols - Bayer HealthCare MEDRAD Stellant Operation And Installation Manual

Monitors

Display and Control Unit (DCU)

Symbols

®
MEDRAD Stellant ISI 700 Module Operation and Installation Manual
In some countries, the MEDRAD
choice of two monitors, shown below - "Display and Control Unit (DCU)" and "Certegra
Workstation." The Certegra Workstation comes in two models, shown below as Model 1 and
Model 2. The Certegra Workstation hardware buttons differ slightly between Models but the
screen/monitor information remains the same.
Throughout the manual, "Display and Control Unit (DCU)" and "Certegra Workstation" will be
used to refer to the two when there are differences in how information is presented on the
screens.
®
Certegra Workstation (Model 1)
The following symbols are used on the ISI module:
PN
®
Stellant CT Injection system may be purchased with a
Certegra
Manufacturer (ISO 15223-1, 5.1.1)
Date of Manufacture (ISO 15223-1, 5.1.3)
Catalog Number (ISO 15223-1, 5.1.6)
Serial Number (ISO 15223-1, 5.1.7)
Part Number
Authorized Representative in the European
Community (ISO 15223-1, 5.1.2)
This Side Up (ISO 7000, 0623)
Fragile, Handle With Care (ISO 15223-1,
5.3.1)
2
®
®
Workstation (Model 2)