To install the ISI module:
1.
Unpack the ISI module.
2.
Connect the ISI module communication cable to injector base.
3.
Connect interface cable from scanner to ISI module.
4.
Connect the power cable to the ISI module. Ensure power indicator is illuminated.
Scanner cable
(Provided by scanner
manufacturer)
5.
If a Certegra Workstation is being installed as an upgrade to an existing injector with an
ISI 700 option, determine whether or not the base has a hub installed (pictured below).
1. ISI module assembly
3. Injector to ISI cable
P115
7
2. Power cord