Hanging The Fan - Hunter Gilmour Installation Manual

Top Housing
Thread the wires through the top housing. Place the top
housing onto the motor housing so that the holes in the
top housing lineup with the holes in the motor housing and
the adapter.
NOTICE
To prevent damage to fan,
ALWAYS lift holding the fan
housing.
Ceiling Bracket Hanging Fan
Installing the Top Housing
Adapter
Raise the fan and align the slots in the
canopy with the hooks on the ceiling plate.
Note: To hang the fan, you must tilt the canopy to
an almost vertical position so that the canopy slots
sit on the ceiling plate hooks.
Wiring Canopy
Install the top housing screws. These
screws can be found in the
hardware bag.

Hanging the Fan

Blades
bag
Note:
Fan style may vary.
Place the slots over the ceiling
plate hooks to hang the fan.
Light Bulbs
1886
x3
Top Housing
Screw
4
Remote