Safety Information On Electromagnetic Interference; Safety Devices; Labels And Symbols On The Product - Invacare Rea Dahlia 30 User Manual

2.2 Safety Information on
Electromagnetic Interference
This mobility device was successfully tested in accordance
with International standards as to its compliance with
Electromagnetic Interference (EMI) regulations. However,
electromagnetic fields, such as those generated by radio and
television transmitters, and cellular phones can influence the
functions of powered mobility devices. Also, the electronics
used in our mobility devices can generate a low level of
electromagnetic interference, which however will remain
within the tolerance permitted by law. For these reasons we
ask you to please observe the following precautions:
WARNING!
Risk of malfunction due to electromagnetic
interference
– Do not switch on or operate portable
transceivers or communication devices (such as
radio transceivers or cellular phones) when the
mobility device is switched on.
– Avoid getting near strong radio and television
transmitters.
– In case the mobility device should be set
in motion unintentionally, switch it off
immediately.
– Adding electrical options and other components
or modifying the mobility device in any way
can make it susceptible to electromagnetic
interference. Keep in mind that there is no sure
way to determine the effect such modifications
will have on the overall immunity of the
electronic system.
– Report all occurrences of unintentional
movement of the mobility device to the
manufacturer.

2.3 Safety Devices

WARNING!
Risk of accidents
Safety devices that are incorrectly set or no longer
working (brakes, anti-tipper) can cause accidents.
– Always check that the safety devices are
working before you use the wheelchair and
have them checked regularly by a qualified
technician or your authorized provider.
CAUTION!
Risk of Injury
Non-original or wrong parts may affect the
function and safety of the product.
– Only use original parts for the product in use.
– Due to regional differences, refer to your
local Invacare catalog or website for available
options or contact your Invacare distributor.
See addresses at the end of this document.
The functions of the safety devices are described in chapter
3 Product Overview, page 9 .
1572307-J

2.4 Labels and symbols on the product

Identification label
The identification label is attached to the frame of your
wheelchair and gives the following information:
Manufacturer's address
A
Date of manufacture
B
Product description
C
Seat width
D
Reference number
E
Serial number
F
Medical device
G
Serial number barcode
H
I EAN/HMI barcode
Maximum user weight
J
Read user manual
K
European conformity
L
Read user manual
Indicates a hazardous situation that could
result in serious injury or death if it is not
avoided.
Posture belt information label
The posture belt has the good length, when
there's just sufficient space for a flat hand
between body and belt.
Safety
7