Trunk Support "Swing-Away; Lateral Positioning Pads (For Adjustable Backrest Cover Only); Using Lateral Positioning Pads - Invacare Rea Dahlia 30 User Manual

Rea® Dahlia® 30 / 45
Angle adjustment — multi adjustable cushion
1. Loosen the screw E.
2. Adjust the cushion to the required angle.
3. Re-tighten the screw.

4.5 Trunk support "swing-away"

B
The holder for the "swing-away" trunk support is
placed in the attachment A on the backrest
1. Loosen the knob B.
2. Place the trunk support holder C.
3. Re-tighten the knob.
Tools: 5 mm Allen key / 13 mm fixed spanner.
1. The angle can be adjusted by loosening the screws E
and bolts D on the trunk support arm.
2. Hold with the Allen key and tighten with the fixed
spanner.
3. Remember to re-tighten the screws and bolts when the
required position is achieved.
22
A C
The "swing-away" trunk support can be turned
sidewards in order to be out of the way when the
user is moving in to or out of the wheelchair.
CAUTION!
Risk of pinching
– The cover on the trunk support arm must
always be on when the chair is in use.
4.6 Lateral positioning pads (for
adjustable backrest cover only)
WARNING!
Risk of trapping
– Be careful not to trap your trunk between the
two lateral positioning pads during front or
lateral transfers; when the user is moving in
the wheelchair.
CAUTION!
Risk of uncomfortable posture
Insufficient space between the lateral positioning
pads can be uncomfortable for certain users.
– This adjustment must be performed by a
qualified technician upon agreement by a
prescribing physician.
– Consult with your authorized provider.
The lateral positioning pads can be adjusted in height
and sideways.

4.6.1 Using lateral positioning pads

C
B
1. Remove the backrest cover A.
2. Adjust the lateral positioning pads B in height and
sideways to the required position with the hook surface
of the backrest cover C.
A
1572307-J