Turning The Answering System On/Off; Setting Your Outgoing Message (Greeting) - Uniden WDECT 2345+1 Owner's Manual

Turning the Answering System On/Off

1) To turn the answering system on, press
answer on/off
phone is in standby mode or from the Answer
Setup menu.
Message
!
messages stored in memory appear on the
When the
answering system
LCD. If the LCD flashes, then there are
is full, you will
new messages waiting for you.
hear "No
2) To turn the answering system off, press
Remaining Time"
and FULL
Appears on the LCD.
ANSWER
appears on the
OFF
LCD. You should

Setting Your Outgoing Message (Greeting)

delete some
messages
When you receive a call, the answering system automatically plays either the pre-
so that the system
recorded message or your own greeting. To record your own greeting, or choose
can record new
between the two outgoing messages, refer to "Answering System Setup" on page
messages.
56. The following message is pre-recorded: "Hello, no one is available to take your
call. Please leave a message after the tone."
Announce only feature
The announce only feature plays a pre-recorded outgoing message or your own
personal outgoing message, but it will not allow the caller to leave a message.
To set announce only, follow the steps on "Setting the Record Time"
on page 58. If you want to use your own greeting and you want to change your
greeting to omit the prompt to leave a message, refer to "Selecting Your Greeting
(Base only)"on page 56. The following message is pre- recorded: "Hello, no one is
available to take your call. Please call again."
on the base when the
and the number of
answer on/off on the base.
[61]