Speed Dialing; Editing Or Erasing A Stored Name, Phone Number, Distinctive Ring And Speed Dial - Uniden WDECT 2345+1 Owner's Manual

Speed Dialing

You can program up to ten speed dial numbers in each handset and the base.
You must program a speed dial number before you can use the speed dialing
feature. When the phone is in standby mode, press and hold a number key ( - )
associated with the speed dial location desired until the phone number appears;
then press talk/flash or , or pick up the corded handset. The number stored in
that speed dial location (SPD1 - SPD0) is then dialed.
Editing or Erasing a Stored Name, Phone Number,
Distinctive Ring and Speed Dial
Base Instructions
1) When the phone is in standby mode, press
To delete all phonebook locations, press
/volume up/down to select
Delete All
press OK soft key. Delete All? appears.
Use /volume up/down to select
Yes
You will hear a confirmation tone.
2) Press /volume up/down to select
Dial/Edit
soft key.
3) Use /volume up/down or the number keypad to select desired phonebook
entry (see "Viewing the Phonebook" on page 44).
4) When you have found the desired phonebook entry, press the
edit the entry.
0 9
Phonebook : 50
Copy
.
Delete All All
and
, and then press the OK soft key.
, and then press the OK
EDIT soft key to
[46]
!
The Copy and
Delete All
options are not
available on the
handset.
!
The base display
is shown