Set Up The Ipv6 Tunnel; Use The Public Ipv6 Tunnel Service-6To4 - TP-Link TD-W9970 User Manual

Chapter 13
• Interface: Determined by the port (WAN/LAN) that sends out the data packets.
In the example, the data is sent to the gateway through the LAN port, so LAN
should be selected.
5. Select the check box to enable this entry.
6. Click Save to make the settings effective.
Done!
Open a web browser on your PC. Enter the company server's IP address to visit the
company network.

13. 7. Set Up the IPv6 Tunnel

The IPv6 Tunnel feature helps you obtain IPv6 resources based on an IPv4 WAN
connection or vice versa.
IPv6 Tunnel is a transition mechanism that allows isolated IPv6 hosts and networks to
reach each other over IPv4-only infrastructure before IPv6 completely supplants IPv4.
It is a temporary solution for networks that do not support native dual-stack, where
both IPv6 and IPv4 run independently.
The modem router provides three tunneling mechanisms: 6to4,
way to set up 6rd and DS-Lite tunnel are similar.

13. 7. 1. Use the Public IPv6 Tunnel Service-6to4

The 6to4 tunnel is a kind of public service. If there are any 6to4 servers on your network,
you can use this mechanism to access IPv6 service. If your ISP provides you with an
IPv4-only connection but you want to visit IPv6 websites, you can try to set up a 6to4
tunnel.
I want to:
Set up the IPv6 tunnel though my ISP doesn't provide me with the tunnel service.
How can I do that?
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced
3. Tick the check box, select
connection from the drop-down list, then click Save.
> Network > IPv6 Tunnel.
6to4 as the tunneling mechanism and select a WAN
Specify Your Network Settings
6rd and DS-Lite. The
80