TP-Link TD-W9970 User Manual page 77

Chapter 13
3. Click Start WPS
4. Press the WPS button of the client device directly.
5. The router's Wireless LED flashes quickly for about 2 minutes during the WPS
process.
6. When the Wireless LED is on, the client device has successfully connected to the
modem router.
Method 3: Enter the modem router's PIN on your client device
Use this method if your client device asks for the modem router's PIN.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced
3. Take a note of the Current PIN of the modem router. You can also click the
button to get a new PIN.
4. On the client device, enter the modem router's PIN. (The default PIN is also printed
on the label of the modem router.)
5. The router's Wireless LED flashes quickly for about two minutes during the WPS
process.
6. When the Wireless LED is on, the client device has successfully connected to the
modem router.
Note:
The WPS function cannot be configured if the wireless function of the modem router is disabled. Please make sure the
wireless function is enabled before configuring WPS.
Method 4: Enter the client device's PIN on the modem router
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced
on the page.
> Wireless > WPS page. Click
> Wireless > WPS page. Click
Specify Your Network Settings
Method Two--PIN.
Method Two--PIN.
Generate
73