TP-Link TD-W9970 User Manual page 39

Chapter 9
1 ) IP Range: Enter the IP address. The field can be single IP address or IP address
range according to your demands. When you configure the single IP address,
the computer with this IP address will get independent given bandwidth. When
you configure the IP address range, all computers in the range will share the
given bandwidth.
2 ) Port Range:
UDP protocol is from 1 to 65535.
3 ) Protocol: Keep the default setting. Or you can choose the TCP protocol or UDP
protocol.
4 ) Priority: Keep the default setting. You can change the value if you want to first
guarantee the bandwidth for one computer. The smaller value has the higher
priority.
5 ) Upstream/Downstream:
6 ) Check to enable this entry and click Save.
7. Repeat Step 6 to add a rule for the other computer.
Done!
Now you and your roommate have an independent bandwidth.
Enable the port range. The default port range of TCP protocol or
Enter the bandwidth according to your division.
Bandwidth Control
35