TP-Link TD-W9970 User Manual page 94

Chapter 14
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced
Management section.
3. Tick the check box to enable
via HTTPS to allow for HTTPS connection. Keep the
4. Set the client device allowed for remote management. Select
devices to manage the modem router. If you just want to allow a specific device to
manage the modem router, select
address of the remote device.
5. Click Save.
All devices or the specific device on the internet can log in to your router using the
address displayed on the
modem router.
Tips:
1. If you were warned about the certificate when visiting the web management page remotely, click
option) to continue. To avoid this warning, you can download and install the certificate on the modem router's web
management page at Advanced
2. The router's WAN IP is usually a dynamic IP. Please refer to
in to the router through a domain name.
> System Tools >
Remote Management. Enable
Only the Following IP Address
Manage This Router via the Address
> System Tools > Administration.
Administrate Your Network
Administration page. Locate the
Port as the default setting.
Set Up a Dynamic DNS Service Account
Remote
Remote Management
All to allow all remote
and enter the IP
field to manage the
Trust (or a similar
if you want to log
90