TP-Link TD-W9970 User Manual page 9

Chapter 1
Name
Power
DSL
Internet
Wireless
USB
LAN
Note:
If the DSL LED is off, please check your internet connection. Refer to
about how to connect to the internet correctly. If you have already made a successful connection, please contact your
ISP to make sure your internet service is available now.
Status
On The system has started up successfully.
The system is starting up or firmware is being upgraded.
Flashing
Do not disconnect or power off your modem router.
Power is off. Please ensure that the power adapter is
Off
connected correctly.
On DSL synchronization is complete.
Flashing DSL synchronization is in progress.
There is no connection to the DSL Port or DSL
Off synchronization fails. Please refer to the following
for troubleshooting.
On Internet service is available.
There is no successful internet connection or the
Off
modem router is working in bridge mode.
On The wireless function is working properly
WPS handshaking is in process. The LED will turn solid
on if a wireless device is connected to the network. If
Flashing there is no wireless connection, it will keep flashing for 2
minutes before turning solid on (if the wireless function
is disabled during WPS handshaking, it will go off ).
Off The wireless function is disabled.
On The USB device is identified and ready to use.
Flashing The USB device is being identified.
Off No USB device is plugged into the USB port.
At least one LAN port is connected to a powered-on
On
device.
Off No LAN port is connected to a powered-on device.
Get to Know Your Modem Router
Indication
Connect Your Modem Router
Note
for more information
5