Redial; Speakerphone; Music On Hold - Uniden FP105 Operating Manual

Caller id on call waiting speaker phone
Hide thumbs Also See for FP105:
Table of Contents

Advertisement

HANDSET
1. Pick up the Handset from the Base.
MAKING A
2. Dial desired number.
3. Hang up upon completion of the call.
CALL
RECEIVING I
1. Pick up the Handset from the Base.
CALL
2. Speak.
3. Hang up upon completion of the call.
® REDIAL
If you want to redial the last number dialed simply pick up the handset or
press the speaker button, then press the rdl/p button. The telephone will
automatically redial the last number dialled.
® SPEAKPHONE
You can place a call on Speakerphone mode anytime by pressing the
speaker button during a call, then place the Handset on the base. Also, you
can transfer a call to the Handset anytime during a call by simple picking up
the Handset.
® RINGER VOLUME
While the phone is ringing, you can adjust the ringer volume of your
telephone by moving the ringer volume switch, located at the rear of the
telephone, to the desired off/lo/hi position.
® BASE SPEAKER VOLUME
While on a call, adjust base speaker volume slider control, located at the
right side of the telephone, to the desired level.
® HANDSET VOLUME
While on a call, adjust the handset volume switch, located at the side of the
telephone, to the desired level.

SPEAKERPHONE

1. Key in desired telephone number.
2. Press dial button (The phone goes
speakerphone mode automatically)
3. To hang up, press speaker key.
1. Press speaker key. Speak.
2. To hang up, press speaker key
again.
While the phone is ringing, you can adjust the ringer tone of your telephone by moving the
ringer tone switch, located at the rear of the telephone, to the desired tone.
Press the mute button to turn off the handset microphone,
allowing private conversations in the same room without the
other party hearing.
Press the mute button again to resume the conversation with
the calling party.
!
During the mute condition, the display will show < MIC MUTE >.
.
1. To place a call on hold, press the hold button
and hang up.
The hold/speaker LED will flash, the display
will show < CALL ON HOLD >.
2.
To begin conversation again, pick up the handset or press the speaker button or pick up
an extension phone (if available), the hold will then be automatically released.

MUSIC ON HOLD

When a call is placed on hold, the telephone will play a popular melody to reassure your Caller
that the call has not been disconnected.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents