General Operation; Introduction; Powering The Display On/Off - Raymarine E Series Reference Manual

81244_4.book Page 7 Thursday, January 31, 2008 1:53 PM
Chapter 2: General Operation
Chapter 2: General Operation

2.1 Introduction

This chapter gives details of the general operation of the E-Series display, and covers
the following subjects:

• Powering the display on/off.

• Using the controls.
• Application display.
• Displaying and editing additional information.
• Adjusting the display lighting.
• Initial setup procedures.
• Using CompactFlash cards.
• Managing data.
• Operating a networked E-Series Display.
• Emergencies and warnings.
2.2 Powering the display ON/OFF
Power ON
D6577-1
At this time the radar scanner (if fitted and powered) is checked for compatibility with
the display. An error message is displayed if the scanner is incompatible.
Power OFF
Remember to replace the suncover to protect the display.
Press the POWER button until the introductory logo is displayed. The keys
light up and after a few seconds an application page and a navigation
warning and weather data disclaimer is displayed. Read this information
and then press OK to remove it.
Press and hold the POWER button until the power down count reaches
zero. If the POWER button is released within the countdown period, power
off is cancelled.
7