Setting Up Your Chart And Its Cartography; Chart Setup - Raymarine E Series Reference Manual

81244_4.book Page 107 Thursday, January 31, 2008 1:53 PM
Chapter 4: Using the Chart

4.19 Setting up your chart and its cartography

The set up for your chart and its cartography can be changed from the standard
configuration to suit your particular needs. Although you will probably only do this
when you first use the chart, you may decide to make subsequent adjustments once
you become more familiar with the system. Any settings that you change are retained
even when you power off.

Chart Setup

To select the Chart Setup Menu:
MENU
The following table details the functions and options within the Chart Setup menu:
FUNCTION
Description
Object Information
OFF - No info pop-up is displayed but detailed data can still be dis-
played by pressing OK.
ALL ON - the info pop-up for all cartographic areas (including
objects) is displayed.
Points ON - the info pop-up only displayed for objects selected with
the cursor.
Vector Length
The time period specified for drawing COG and Heading vectors.
Vector Width
Sets the width of the COG and HEADING chart vector lines.
Record Vessel Track By
AUTO - system automatically creates track points.
TIME - for track point creation by time.
DISTANCE - for track point creation by distance.
Setup
Chart Setup...
Cartography Setup
GPS Status...
Compass Setup...
Highlight Chart Setup menu
Enter Chart Setup menu
Chart Setup Menu
Object Information Points ON
Vector Length Infinite
Record Vessel Track By Time
Track Interval 1 secs
Datum WGS 1984
Chart Offset...
OPTIONS
(Default in bold)
OFF
All ON
Points ON
3 Mins
6 Mins
Infinite
Thin
Normal
Wide
Auto
Time
Distance
107